Amateur Radio Station K1TTT #1 120' Tower

120' Rohn 25g tower.

This tower has antennas for 10m. It also holds one end of the rope for the 160m inverted L's and the 80m 4-Square array.

It is Rohn 25g installed with buried short base section, Rohn spec base and anchor blocks, and solid 1/4" EHS steel guy wires with guy brackets and torque arms. The top is a tapered tube top with a Yaesu G-1000SDX rotor. There is no thrust bearing at this time because the G-1000SDX should be able to handle the load of the antenna and it is so tall that the bearing wouldn't fit above it.

It has a ring rotor at the 30' level to allow independent rotation of that antenna.

David Robbins, K1TTT K1TTT@arrl.net